My suggestion is simply soldier the pin connector to
the mother board with about 8-10 inches of wire.  That
way you can position it where ever you want it.
Especially pointed up so there is less stress on the
pins themselves.

-Joe




--- Ronald Schatte <tech_unit@...> wrote:
> Ok, question (the most important one I have for this
> e-mail): Who here has a toploading Nintendo
> (Nintendo
> Entertainment System Revised or 2, whatever you want
> to call it)? I would like to see a diagram of how
> the
> motherboard and the 72-pin connector are positioned.
>
>
> Joe (and anyone else who's interested), my idea is
> to
> cut through the side of the 72-pin connector to get
> the length of the pins able to bend, in fact, almost
> remove the entire section of plastic to bend it
> backwards (of course it couldn't go forwards). As
> for
> anchoring/supporting it, I think a bar will have to
> be
> put in through the sides of the casing for enough
> support for a person shoving a cartridge in. Now
> what
> made of is another question, plastic would do the
> trick but you'd probably have to put in criss-cross
> bars to support each other which would get rather
> thick, wood is definitely out of the question, but
> possibly the rf shield would suffice through
> modifying
> it while still using its original screws.
>
> Wulp, that's been my rant for the day, keep in
> touch!
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail - More reliable, more storage, less spam
> http://mail.yahoo.com
>


__________________________________
Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam
http://mail.yahoo.com

Ok, question (the most important one I have for this
e-mail): Who here has a toploading Nintendo (Nintendo
Entertainment System Revised or 2, whatever you want
to call it)? I would like to see a diagram of how the
motherboard and the 72-pin connector are positioned.

Joe (and anyone else who's interested), my idea is to
cut through the side of the 72-pin connector to get
the length of the pins able to bend, in fact, almost
remove the entire section of plastic to bend it
backwards (of course it couldn't go forwards). As for
anchoring/supporting it, I think a bar will have to be
put in through the sides of the casing for enough
support for a person shoving a cartridge in. Now what
made of is another question, plastic would do the
trick but you'd probably have to put in criss-cross
bars to support each other which would get rather
thick, wood is definitely out of the question, but
possibly the rf shield would suffice through modifying
it while still using its original screws.

Wulp, that's been my rant for the day, keep in touch!

__________________________________
Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam
http://mail.yahoo.com

Looks more of a "rear load" to me,  that was not
intended to sound bad.

Did you use the pin connector from a game genie to do
that?  If not what did you use to recieve the cart and
where did you get it?  Lastly, does that straight
connection put any stress on the board or is the cart
supported in some way?

-Joe




--- rimma_69 <rimma_69@...> wrote:
> I uploaded pictures of my NES that has had the
> "toploader" mod. Tell
> me what you think of them.
>
>


__________________________________
Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam
http://mail.yahoo.com

I uploaded pictures of my NES that has had the "toploader" mod. Tell
me what you think of them.

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the nesmodifications
group.

   File        : /Toploading NES mod/NES.JPG
   Uploaded by : rimma_69 <rimma_69@...>
   Description :

You can access this file at the URL

http://groups.yahoo.com/group/nesmodifications/files/Toploading%20NES%20mod/NES.\
JPG

To learn more about file sharing for your group, please visit

http://help.yahoo.com/help/us/groups/files

Regards,

rimma_69 <rimma_69@...>

I have mentioned this before in other groups.
Replacing the pin connector is not always neccessary.
If you open up the nes to remove the pin connector,
look at it before you throw it away.  If the pins are
not really dirty but simply (which often times
happens), you can simply bend them back into place to
make a tighter connection.  Just be careful when
you're doing it.

Now for the mod, It took me about 4 hours.  I
soldiered new contacts to the existing pin connectors
to take up some space.  Enough space so that you don't
have to push the cart down in the deck, you now just
slide it in and its already making contact.  This
method saves alot of wear and tear.  The downfall to
this is it takes a lot of time to do it right.

-Joe


--- pamer_1 <pamer@...> wrote:
> This is a tip rather than a mod, but useful
> nonetheless.
>
> If when you insert a cart it tends to blink on
> frequent occassions
> one simply way to get a better connection is to open
> the
> game "hatch" and put your hand on the cart and
> wiggle it towards you.
> My NES was almost impossible to use until I learnt
> of this tip from
> the pawnbroker where I usually buy NES games from.
>
>


__________________________________
Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam
http://mail.yahoo.com

This is a tip rather than a mod, but useful nonetheless.

If when you insert a cart it tends to blink on frequent occassions
one simply way to get a better connection is to open the
game "hatch" and put your hand on the cart and wiggle it towards you.
My NES was almost impossible to use until I learnt of this tip from
the pawnbroker where I usually buy NES games from.

Constructive criticism is fine by me. If it makes the walkthrough
easier to understand and the mod easier to do then its good.

Do that and also keep in mind that you can mod your
NES 2 (toploader) to have stereo sound (of course it
would only be mono sound since they didn't make games
with stereo back then). I (as well as Joe I know of,
possibly others) would like to be updated on your
progress, if you don't mind, we can offer constructive
criticism also.

-Ronald

--- Joe <palacki808@...> wrote:
> make certian you find a good way to support the pin
> connector.  I tried that mod already, but I ended up
> breaking off part of the mother board.  It was a
> stupid mistake, I wasn't paying attention.
>
> -Joe
>
>
> --- rimma_69 <rimma_69@...> wrote:
> > Im working on a walkthrough on how to turn your
> side
> > loading NES
> > into a top loading NES. It ends up being better
> then
> > the top loader
> > because you have AV! I should have the walkthrough
> > up in the next 2
> > weeks.
> >
> >
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail - More reliable, more storage, less spam
> http://mail.yahoo.com
>


__________________________________
Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam
http://mail.yahoo.com

make certian you find a good way to support the pin
connector.  I tried that mod already, but I ended up
breaking off part of the mother board.  It was a
stupid mistake, I wasn't paying attention.

-Joe


--- rimma_69 <rimma_69@...> wrote:
> Im working on a walkthrough on how to turn your side
> loading NES
> into a top loading NES. It ends up being better then
> the top loader
> because you have AV! I should have the walkthrough
> up in the next 2
> weeks.
>
>


__________________________________
Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam
http://mail.yahoo.com

Im working on a walkthrough on how to turn your side loading NES
into a top loading NES. It ends up being better then the top loader
because you have AV! I should have the walkthrough up in the next 2
weeks.

Hey Joe,
   A lot of us from other groups are here, so we know
you are no real newbie. Welcome to the group!

__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you’re looking for faster
http://search.yahoo.com

Thanks.

-Joe



--- Andrew M Evans <AndrewM@...> wrote:
> Welcome to the group Joe!
>
> Andy
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system
> (http://www.grisoft.com).
> Version: 6.0.611 / Virus Database: 391 - Release
> Date: 3/3/2004


__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you’re looking for faster
http://search.yahoo.com

Hello, my name is Joe.  I'm new to the group but not to nintendo
repair and tinkering.  Someone from another nes group posted a link
to here.  Just thought I'd give a shout out to everyone.

-Joe

Here is a mod for the NES LED.
http://www.neszone.net/moddingandfixing/ledchange.shtml

Raven,
   There are multiple modifications (some not being
mods) that can do part or all of what you are asking
for. Again I am at work but when I get home I will
hopefully be able to find some files about that stuff.
I know you can make it a front loader into a toploader
but you will have to do some cutting of the chasis.
Easiest route would be to get a Famicom and the
Nintendo liscensed 60-72 pin converter. In fact, if
you're lucky, they used to include them with some of
the first games, you'll just have to do some looking
and have good weight judgement to find the cartridges
with them. I'll see what I can find when I get home.

-Ronald



> Okay. I'm new here... and have never done any MODs
> to any of my machines
> (though I've had some done by others or used gadgets
> and go-arounds).
> The NES is one system I've never actually owned,
> though in the last few
> years I've been looking to get one (you know, set it
> up next to my Atari
> 2600). Well, just before they disappeared off store
> shelves, I remember
> seeing a top loader version. I was too young to have
> that kind of pocket
> money, and parents thought I was too big for
> videogames by then... so I had
> to pass. Now years later (after seeing years of
> friends doing the cartridge
> ritual), I find that the rare top-loader is even
> more of a prize than I
> thought... and still just as costly as it was 20
> years ago!
>
> SO.... is there a way to convert a traditional NES
> into either a top-
> loader, or some other alteration that gets around
> all the hassles I'm sure
> everyone knows what I'm talking about... OR, can I
> simply get a FamiCom
> (which i thought were all top-loaders anyway) and do
> some sort of pin
> convertion (60 to 72) to play US carts? (or better
> yet... play BOTH)
>
> If this sounds like the words of a dreamer n00b... I
> apologize. But you
> asked, so I posted :)
>
> Raven
> [who's been getting by with a GP32 and NesterDC for
> her NES fix]
>
>
>
>
>
________________________________________________________________________
>
________________________________________________________________________
>
>
>
>
------------------------------------------------------------------------
> Yahoo! Groups Links
>
>
>      nesmodifications-unsubscribe@yahoogroups.com
>
>
>
------------------------------------------------------------------------
>
>


__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you’re looking for faster
http://search.yahoo.com

this might be off topic, but does anyone know any mods for using NES,
SNES or Genesis controllers on a PSone? I have the NES Advantage and
the SNES/Genesis Fighter Sticks and would like to find a way to use
them on the PSOne



--- In nesmodifications@yahoogroups.com, "Ronald Schatte"
<tech_unit@y...> wrote:
> Anyone looking for any modifications or instructions to some they
> know about? I know of a handful of them and will not mind posting
> them or uploading them for anyone to use, that's what we're here
for,
> right?

Retro Championships Website

http://uk.groups.yahoo.com/group/UKretro_championhips

I did a toploading mod for my NES. The game loads at the back of the
console now. It cost me a game genie :(. But it was worth it in the
need because it no long blinks :).

>
>
>
>
> Anyone looking for any modifications or instructions to some they  know
> about? I know of a handful of them and will not mind posting  them or
> uploading them for anyone to use, that's what we're here for,  right?

Okay. I'm new here... and have never done any MODs to any of my machines
(though I've had some done by others or used gadgets and go-arounds).
The NES is one system I've never actually owned, though in the last few
years I've been looking to get one (you know, set it up next to my Atari
2600). Well, just before they disappeared off store shelves, I remember
seeing a top loader version. I was too young to have that kind of pocket
money, and parents thought I was too big for videogames by then... so I had
to pass. Now years later (after seeing years of friends doing the cartridge
ritual), I find that the rare top-loader is even more of a prize than I
thought... and still just as costly as it was 20 years ago!

SO.... is there a way to convert a traditional NES into either a top-
loader, or some other alteration that gets around all the hassles I'm sure
everyone knows what I'm talking about... OR, can I simply get a FamiCom
(which i thought were all top-loaders anyway) and do some sort of pin
convertion (60 to 72) to play US carts? (or better yet... play BOTH)

If this sounds like the words of a dreamer n00b... I apologize. But you
asked, so I posted :)

Raven
[who's been getting by with a GP32 and NesterDC for her NES fix]

Anyone looking for any modifications or instructions to some they
know about? I know of a handful of them and will not mind posting
them or uploading them for anyone to use, that's what we're here for,
right?

I use a similar driver called NTPad XP. It's website is in poor
condition, aparently hacked, but it's a great driver:
http://www.ntpad.com.ar/

springwaffle wrote:

> --- In nesmodifications@yahoogroups.com, "pamer_1" <fishmugger@h...>
> wrote:
> > http://www.dreamcliff.com/personal/daniel/jump/
> > Connect NES and SNES controllers (up to 5) to ur pc parallel port.
>
> I made one of those. But the only site I found with drivers that
> worked was:
>
> http://www.geocities.com/deonvdw/Docs/PPJoyMain.htm
>
> Parrell Port Joystick. Mine works great with my NES emulator (FCE
> Ultra). I haven't figured out how to get the Zapper to work with it
> though. I don't think you can. Or if you can I'm sure you have to
> plug it in to the 2nd port just like on NES.
>
>
> *Yahoo! Groups Sponsor*
> ADVERTISEMENT
>
>
> ------------------------------------------------------------------------
> *Yahoo! Groups Links*
>
>     * To visit your group on the web, go to:
>       http://groups.yahoo.com/group/nesmodifications/
>
>     * To unsubscribe from this group, send an email to:
>       nesmodifications-unsubscribe@yahoogroups.com
>      
<mailto:nesmodifications-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
>     * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>       Service <http://docs.yahoo.com/info/terms/>.
>
>

--- In nesmodifications@yahoogroups.com, "pamer_1" <fishmugger@h...>
wrote:
> http://www.dreamcliff.com/personal/daniel/jump/
> Connect NES and SNES controllers (up to 5) to ur pc parallel port.

I made one of those. But the only site I found with drivers that
worked was:

http://www.geocities.com/deonvdw/Docs/PPJoyMain.htm

Parrell Port Joystick. Mine works great with my NES emulator (FCE
Ultra). I haven't figured out how to get the Zapper to work with it
though. I don't think you can. Or if you can I'm sure you have to
plug it in to the 2nd port just like on NES.

Go for it.

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the nesmodifications
group.

   File        : /Schematics/page2.jpg
   Uploaded by : rimma_69 <rimma_69@...>
   Description :

You can access this file at the URL

http://groups.yahoo.com/group/nesmodifications/files/Schematics/page2.jpg

To learn more about file sharing for your group, please visit

http://help.yahoo.com/help/us/groups/files

Regards,

rimma_69 <rimma_69@...>

Im doing another MOD!!!!!!!!!!
Im making an adopter that lets me use two NES controllers on my
computer!!!!!!!!!!!!
More later on when I finish!